Request a quote

Telecom

The most innovative products in the Telecom Industry

Dura-Line is leading the telecommunications market by offering not only the most complete product offering, but the most innovative products in the industry.

Silicore & Wave Ribbed products allow for the fastest cable installation while achieving the longest installation distances in the industry, lowering the cost of your projects.  Along with our complete offering of accessories, no company can offer such a complete package for your project needs.

Continuing the innovation process, Dura-Line has developed a complete line of MicroDuct and FuturePath products.  Again, offering solution, which lowers your installation costs while offering the most expandable network to meet all your future needs.  Look no further then Dura-Line for your telecommunications duct and conduit needs.

Smoothwall duct is made from virgin, flexible HDPE and is used for Optic Fiber and copper cable networks. It can easily be swept to make gradual bends without special forming equipment.. It has Superior resistance to natural...
FuturePath is a bundle of MicroDucts sheathed together, providing multiple (future) pathways. MicroCable(s) can be blown / pulled anytime in the individual MicroDucts, as the network grows, without the additional cost of...
Dura-Line Smooth Outside Wall HDPE Conduit with internal longitudinal ribs is made to Industry Standards for Power and Communications Applications. It can be installed using open trench methods, HDD (Horizontal Directional...
Ribbed ducts can withstand typical pulling loads and is highly resistant to crushing forces. The unique design of Ribbed duct allows for fast, easy installation of the duct while providing a lower coefficient of friction for...
  Take a SILICORE lined HDPE Conduit, place a stainless steel corrugated tube that is hermetically sealed with a laser welded seam and you have a conduit that can stand up to extremely harsh and corrosive environments...
DuraFlat is a flat formation of several MicroDucts held together by a thin Web of a common sheath. This flat design enables easy branching of MicroDucts to: each floor in Multi-Storey buildings each house in a straight...
In this construction, one MicroDuct is integrated inside a standard telecom duct during manufacturing. While an Optic Fibre Cable can be blown in the main duct, the empty MicroDuct  can be used in future for upgrading...
Armoured MicroDuct is a standard MicroDuct having a strong layer of ECC Steel Tape Armour and a UV stable HDPE outer sheath for use in aerial and underground networks.  
These are very small aperture HDPE Ducts, which have applications both in in-premise networks as well as OSP. Standard sizes : 14/11.5, 14/10, 12/10, 12/8, 10/8, 10/5.5, 7.5.5, 5.3.5 mm etc.  
Cable-in-Conduit Service Drops trade name ”CableCon” is a HDPE conduit system with the service drop pre-installed in the finished reel or coil, eliminating the need to place the service drop in the conduit. Service Drops are...
Corrugated Flex is a highly flexible form of HDPE conduit used to protect fiber cables in manholes or as a temporary conduit. Corrugated Flex is available in coils.  This product has a greatly reduced bend radius when...
Corrugated Standard is a more flexible form of HDPE conduit used to protect fiber cables in underground conduit systems.  Corrugated Standard can be pulled into main conduit systems for short distances. Corrugated...
Cable-in-Conduit Medium Voltage trade name ”CableCon” is a HDPE conduit system with 15KV, 25KV or 35KV cables pre-installed in the finished continuous length reel, eliminating the need to pull in the Cables.  Product is...
Cable-in-Conduit 600 Volt Copper trade name ”CableCon” is a HDPE conduit system with a wide variety of 600 Volt Copper cables pre-installed in the finished continuous length reel, eliminating the need to pull in the Cables....
Cable-in-Conduit 600 Volt Aluminum trade name ”Cable Con” is a HDPE conduit system with a wide variety of 600 Volt cables pre-installed in the finished continuous length reel, eliminating the need to pull in the Cables....
Cable-in-Conduit Coaxial trade name ”CableCon” is a HDPE conduit system with Coaxial Cable pre-installed in the finished continuous length reel, eliminating the need to pull in the Coaxial Cable.  Normally Coaxial is...
Cable-in-Conduit Fiber trade name ”CableCon” is a HDPE conduit system with Fiber Optic Cable pre-installed in the finished continuous length reel, eliminating the need to pull in or jet in the fiber.  Normally Fiber is...
It incorporates a flooded galvanized support strand for easy one step aerial placement of duct and strand. The coextruded Silicore lining creates a pathway for easy fiber optic placement. It is available for direct aerial...
The Dura-Guard™ duct is designed as a technically superior and cost-effective solution for replacement of GI, RCC and PVC pipes in fibre optic and electric cable networks. Manufactured from rugged and virgin High Density...
Faster network rollouts have become the key factor in today’s fiercely competitive telecom environment.Dura-Line’s revolutionary TornadoPlus* duct is specially designed to facilitate faster cable blowing. Developed by Dura-...
The robustness and quality of Telecom Network is critically dependent upon proper depth of installation as per design. However, this is often seen to be compromised in the field and because of the nature of installation (...
Features: Conforms to UL-94, V-2 rated Low Smoke emitting Negligible Halogen No other additives like UV stabilizer, Silicore Single layer & Single colour Once buried or laid in tunnel, Life expectancy same as HDPE duct...
The SuperJet®  is designed for blowing or floating telecommunication cables (optical fiber, coax or multipair) in preinstalled ducts. Item #     Description P-ZC-FJ0011101AD SUPERJET-H01 P-...
Dura-Line's Air-Trak™ HD provides a very efficient method for quickly installing cable into a continuous conduit system. The unique Horizontal Design (HD) of the powerful tractor assembly permits rapid loading of the cable,...
The SuperJet®  is designed for blowing or floating telecommunication cables (optical fiber, coax or multipair) in preinstalled ducts. Item # Description P-ZC-FJ0011102AD SUPERJET-P01 I-906689 Air hose, 30 ft...
  The Air-Trak MD features a patented load-sensing system to provide the ultimate in safe installation of micro cables, MicroDucts, as well as conventional optical fiber cables. The MD unit installs 12/10 and 10/8 mm...
The CableJet®  is designed for blowing or floating telecommunication cables (optical fiber, coax or multipair) in preinstalled ducts. Item # Description P-ZC-FJ0021101AD CABLEJET-P01 I-906689 Air hose, 30 ft...
The MiniJet®  is designed for blowing or floating telecommunication cables (optical fiber, coax or multipair) in preinstalled ducts. Item # Description P-ZC-FJ0401102AD MINIJET-H01 P-410004 Hydraulic power pack...
The MiniJet®  is designed for blowing or floating telecommunication cables (optical fiber, coax or multipair) in preinstalled ducts.   Item # Description     P-ZC-FJ0021101AD MINIJET-P01...
  FEATURES: • Sturdy steel construction for maximum durability.  • Foot pedal control for ‘hands-free’ operation.  • Accepts an array of optional stainless steel capstans for various pulling requirements...
  FEATURES: • Available in cargo capacity ranges to meet your exact requirements • Galvanized frame for superior corrosion protection and durability • All models can handle up to a 120-inch diameter, 65-inch wide reel...
  FEATURES: • Versatile, economic transport trailer for cable placing systems • Can be configured to handle either the Plummet or Arnco placing systems • Durable galvanized tubular frame • Optional large, locking...