Request a quote

Enterprise

The Future of MicroTechnology Today

MicroTechnology is a forward-thinking, future-oriented technology that you can put in place today. As network infrastructure demands continue to grow, it becomes more important to better utilize the available space in your existing duct systems. MicroDucts and FuturePath allow for controlled growth of your network infrastructure, meeting bandwidth requirements as needed. With the multiple pathways in FuturePath, as your network grows, you will have available pathways without additional construction costs.

 
Our FuturePath product line is available produced in HDPE, Riser, Plenum and LSHF materials.

 
Smoothwall duct is made from virgin, flexible HDPE and is used for Optic Fiber and copper cable networks. It can easily be swept to make gradual bends without special forming equipment.. It has Superior resistance to natural...
FuturePath is a bundle of MicroDucts sheathed together, providing multiple (future) pathways. MicroCable(s) can be blown / pulled anytime in the individual MicroDucts, as the network grows, without the additional cost of...
Dura-Line Smooth Outside Wall HDPE Conduit with internal longitudinal ribs is made to Industry Standards for Power and Communications Applications. It can be installed using open trench methods, HDD (Horizontal Directional...
Ribbed ducts can withstand typical pulling loads and is highly resistant to crushing forces. The unique design of Ribbed duct allows for fast, easy installation of the duct while providing a lower coefficient of friction for...
  Take a SILICORE lined HDPE Conduit, place a stainless steel corrugated tube that is hermetically sealed with a laser welded seam and you have a conduit that can stand up to extremely harsh and corrosive environments...
DuraFlat is a flat formation of several MicroDucts held together by a thin Web of a common sheath. This flat design enables easy branching of MicroDucts to: each floor in Multi-Storey buildings each house in a straight...
In this construction, one MicroDuct is integrated inside a standard telecom duct during manufacturing. While an Optic Fibre Cable can be blown in the main duct, the empty MicroDuct  can be used in future for upgrading...
Armoured MicroDuct is a standard MicroDuct having a strong layer of ECC Steel Tape Armour and a UV stable HDPE outer sheath for use in aerial and underground networks.  
These are very small aperture HDPE Ducts, which have applications both in in-premise networks as well as OSP. Standard sizes : 14/11.5, 14/10, 12/10, 12/8, 10/8, 10/5.5, 7.5.5, 5.3.5 mm etc.  
Cable-in-Conduit Service Drops trade name ”CableCon” is a HDPE conduit system with the service drop pre-installed in the finished reel or coil, eliminating the need to place the service drop in the conduit. Service Drops are...
Corrugated Flex is a highly flexible form of HDPE conduit used to protect fiber cables in manholes or as a temporary conduit. Corrugated Flex is available in coils.  This product has a greatly reduced bend radius when...
Corrugated Standard is a more flexible form of HDPE conduit used to protect fiber cables in underground conduit systems.  Corrugated Standard can be pulled into main conduit systems for short distances. Corrugated...
Cable-in-Conduit Medium Voltage trade name ”CableCon” is a HDPE conduit system with 15KV, 25KV or 35KV cables pre-installed in the finished continuous length reel, eliminating the need to pull in the Cables.  Product is...
Cable-in-Conduit 600 Volt Copper trade name ”CableCon” is a HDPE conduit system with a wide variety of 600 Volt Copper cables pre-installed in the finished continuous length reel, eliminating the need to pull in the Cables....
Cable-in-Conduit 600 Volt Aluminum trade name ”Cable Con” is a HDPE conduit system with a wide variety of 600 Volt cables pre-installed in the finished continuous length reel, eliminating the need to pull in the Cables....
Cable-in-Conduit Coaxial trade name ”CableCon” is a HDPE conduit system with Coaxial Cable pre-installed in the finished continuous length reel, eliminating the need to pull in the Coaxial Cable.  Normally Coaxial is...
Cable-in-Conduit Fiber trade name ”CableCon” is a HDPE conduit system with Fiber Optic Cable pre-installed in the finished continuous length reel, eliminating the need to pull in or jet in the fiber.  Normally Fiber is...
Faster network rollouts have become the key factor in today’s fiercely competitive telecom environment.Dura-Line’s revolutionary TornadoPlus* duct is specially designed to facilitate faster cable blowing. Developed by Dura-...
The robustness and quality of Telecom Network is critically dependent upon proper depth of installation as per design. However, this is often seen to be compromised in the field and because of the nature of installation (...
Features: Conforms to UL-94, V-2 rated Low Smoke emitting Negligible Halogen No other additives like UV stabilizer, Silicore Single layer & Single colour Once buried or laid in tunnel, Life expectancy same as HDPE duct...
Bendable HDPE Electrical Conduit is a technically superior and cost effective solution for casing electrical, communication, data cables in 'In-building' applications replacing PVC pipes. Made from virgin High Density...
Standard HDPE Ducts factory bundled with PE over-sheath in multi pathways.   Supply length of upto 1000 meters Suitable for DB or DI Options of Traceability feature Significant cost savings > 40% p.p1 {margin: 0....
  The Cable-in-Conduit is a HDPE conduit system with Fiber Optic Cable pre-installed in the finished continuous Duct Length from factory. It eliminates the need to pull in or jet in the fiber cable.   Features and...